Pro audio
-
Neutrik NA3FP 3-Pole XLR Female to 1/4" TRS Plug Adapter
Neutrik NA3FP Overview Designed by Neutrik, the NA3FP 3-Pole XLR Female to 1/4" TRS Plug Adapter has been constructed to bridge the gap between female XLR and 1/4" male connection points. This adapter has been pre-wired, and it features a die-cast shell for durability. Learn MoreExcl. Tax: SAR0.00 Incl. Tax: SAR0.00Call For Price
-
Neutrik NC4FX-B 4-Pin XLR Female Connector
Neutrik NC4FX-B Overview The NC4FX-B from Neutrik is a 4-pin XLR female cable connector that's regarded as an "industry standard" for quality and ease of use. The connector has only 4 parts and no screws for easy assembly. It has a rugged black zinc die cast shell and a fiberglass reinforced hard plastic insert for lasting durability. A chuck type strain relief system provides secure cable clamping, while a boot with a rubber gland gives excellent protection against bend stress. The connector has gold contacts and UL-recognized components. Colored rings and boots are available separately for easy coding and marking. Only 4 parts and no screws for easy assembly Rugged black zinc die cast shell and a fiberglass reinforced hard plastic insert for lasting durability A chuck type strain relief system provides secure cable clamping, while a boot with a rubber gland gives excellent protection against bend stress Gold contacts and UL-recognized components Colored rings and boots are available separately for easy coding and marking Learn MoreExcl. Tax: SAR0.00 Incl. Tax: SAR0.00Call For Price
-
BLACK IDENT NO. 0 - PACK OF 200
PA1/3 CABLE IDENT '0'BLACK PKG 200 Learn MoreExcl. Tax: SAR0.00 Incl. Tax: SAR0.00Call For Price
-
Sennheiser MK 4 Large-Diaphragm Studio Condenser Microphone
The MK 4 Large-Diaphragm Studio Condenser Microphone from Sennheiser is a condenser microphone with fine resolution and sound quality. It can be used for home studio engineers, production studios, and sound reinforcement applications. The MK 4 features a 1" large-diaphragm transducer for a full sound, a wide-frequency response, and low noise. The mic element is shockmounted to eliminate structure-borne noise and vibration. Its sensitivity and frequency response make it well suited for general vocal recording, instruments, amplifier cabinets, and more.
Large-diaphragm capsule (1")
True-condenser design
24K gold-plated diaphragm
Full-metal housing
Capsule shockmounted internally to minimize structure-borne noise
Designed for project studios and stage use
Low inherent self-noise and high maximum SPL
Made in Germany
Learn MoreExcl. Tax: SAR0.00 Incl. Tax: SAR0.00Call For Price
-
NC3MXX-HD-D male
Heavy duty male 3 pole XLR cable connector for outdoor use. Learn MoreExcl. Tax: SAR0.00 Incl. Tax: SAR0.00Call For Price
-
Sennheiser XSW-D Transmitter Beltpack Clip
Sennheiser XSW-D Transmitter Beltpack Clip Learn MoreExcl. Tax: SAR0.00 Incl. Tax: SAR0.00Call For Price
-
Neutrik NC3FDLXB 3-Pin XLR Female Receptacle
Neutrik NC3FDLXB 3-Pin XLR Female Receptacle Learn MoreExcl. Tax: SAR0.00 Incl. Tax: SAR0.00Call For Price
-
Neutrik NA3FDM XLR Female to Male Feedthrough Adapter for Panel Mount
Neutrik NA3FDM Overview The NA3FDM XLR Female to Male Feedthrough Adapter for Panel Mount from Neutrik is designed specifically for the kinds of wall panels often utilized in studios and on stage. It features a zinc diecast chassis and a steel-element latch-locking device. This adapter offers a 3-pin XLR female on the panel side and a 3-pin XLR male on the back side. Learn MoreExcl. Tax: SAR0.00 Incl. Tax: SAR0.00Call For Price
-
Genelec 8050B Active Two-Way 8" Studio Monitor (Single)
Genelec 8050B Overview
Learn More
The 8050B Active Two-Way 8" Studio Monitor from Genelec provides an accurate reproduction of the source material in a compact form-factor with high output. Its die-cast aluminum enclosure features a rounded shape, which minimizes distortions caused by edge diffraction. The metal dome tweeter is surrounded by a smoothly-shaped Directivity Controlled Waveguide, which helps to create an even response when listening both on and off axis.
The 8050B is built with Intelligent Signal Sensing (ISS) technology which automatically activates the speaker when an audio signal is detected, and puts it in Standby Mode when no signal is present, reducing the energy consumption to less than 0.5 watts. The 8050B features a 120 watt high frequency amplifier for its 1" tweeter, and a 150 watt low frequency amplifier for its 8" woofer. The bass response is expanded by a rear-facing reflex port, and a separately available Genelec subwoofer can be used to monitor a wider array of frequencies.
An included Iso-Pod table stand insulates the speaker from vibration and enables you to tilt its position upward or downward
The Iso-Pod can be attached to the base or side of the monitor, for vertical or horizontal positioning
Well-suited for near-field studio monitoring, control rooms, editing suites, surround sound applications and multimedia entertainment systems
Rear-facing Tone Controls enable you to optimize the speaker to its environment
Threaded holes for Omnimount Series 60 brackets and K&M loudspeaker mounts
More compatible mounting accessories, such as ceiling mounts and wall brackets, are available separately
Active crossover filters
Driver unit protection circuitry
Fully magnetically shieldedExcl. Tax: SAR0.00 Incl. Tax: SAR0.00Call For Price
-
GREEN IDENT NO. 5 - PACK OF 200
PA1/3 Audio Cable Marker - Green Ident No. 5PKG200 Learn MoreExcl. Tax: SAR0.00 Incl. Tax: SAR0.00Call For Price