Lighting
-
Neutrik HX-R-BNC Crimp Tool
Neutrik HX-R-BNC Overview The Neutrik HX-R-BNC Crimp Tool is designed for DIE-R series of dies and used for attaching BNC connectors to cables. Learn MoreExcl. Tax: SAR0.00 Incl. Tax: SAR0.00Call For Price
-
ARRI SkyPanel S60-C LED Softlight with Manual Yoke (Blue/Silver, Edison)
ARRI continues to broaden their LED line and reaffirm their commitment to accurate color rendering with the introduction of the SkyPanel S60-C LED Softlight. Supported by a steel yoke, the panel surface area measures 25.4 x 11.8" and employs interchangeable thermoplastic diffusers that range from Lite to Heavy to soften the light and wrap its output around your subject. The SkyPort outputs the equivalent of a 2000W tungsten soft light while drawing a maximum of only 450W. Using technology originally designed for the L7-C Fresnel, the SkyPanel S60-C can be adjusted to output a warm 2800K to icy blue 10,000K light and also uses the full RGB+W color gamut with hue and saturation control for fine adjustments. Full Minusgreen to Full Plusgreen is also possible, so if you're lighting for blue or greenscreen, you can simply dial in your chosen color. This wide degree of control is responsible for a high CRI of 95 and a rating of 90 with the newer TLCI standard. All of these functions as well as 0-100% dimming can be adjusted locally with the SkyPanel's onboard controller or remotely via DMX or a LAN. Besides inputs and outputs appropriate to these functions, the light also has a USB-A port for downloading firmware upgrades from a thumb drive or any PC/Mac. The SkyPanel S60-C can be used worldwide thanks to its included 90-250 VAC power supply, but it can also use optional 23-36 VDC batteries when mains power is unavailable. Besides the power supply, the light comes with a Junior (1 1/8") pin and a standard diffuser. This version of the light has a manual yoke and comes with an Edison power cord. Learn MoreExcl. Tax: SAR0.00 Incl. Tax: SAR0.00Call For Price
-
Aputure Amaran 3-Point 2-Spot 1-Flood Daylight HR672 3-Light Kit
- 2 x HR672 Daylight Spots
- 1 x HR672 Daylight Flood
- 6 x NP-F970 Batteries
- 5500K Daylight Balance
- Full 0-100% Dimming
- 9.37 x 7.48 x 1.26" Panel
- Slots for Connecting Multiple Panels
- 18,800 Lux Brightness at 3.3'
- Diffusion and CTO Included
Excl. Tax: SAR0.00 Incl. Tax: SAR0.00Call For Price
-
Excl. Tax: SAR0.00 Incl. Tax: SAR0.00Call For Price
-
Excl. Tax: SAR0.00 Incl. Tax: SAR0.00Call For Price
-
Neutrik DIE-R-BNC-PS Crimp Tool Die
Neutrik DIE-R-BNC Overview The DIE-R-BNC-PS Crimp Tool Die from Neutrik attaches to the Neutrik HX-R-BNC crimp tool and allows you to attach BNC connectors to cables. Learn MoreExcl. Tax: SAR0.00 Incl. Tax: SAR0.00Call For Price
-
Kupo Baby Kit Stand with Square Legs (9.5')
The black powder-coated Baby Kit Stand with Square Legs from Kupo is a 9.5' support that can handle gear weighing up to 22 lb. The robustly built stand features aluminum construction with metal locking collars and knobs. The legs are square and the top stud is welded for extra stability. The stand's special feature is its sliding, extendable individual leg which can be adjusted to compensate for uneven terrain. Learn MoreExcl. Tax: SAR0.00 Incl. Tax: SAR0.00Call For Price
-
Kupo 40" Riser C-Stand Turtle Base Kit (Silver, 9.7')
The 9.7', silver 40" Riser C-Stand Turtle Base Kit from Kupo is outfitted with a patented spring ring locking system that removes all tension from the legs so that gravity can do the work for you. With the turtle base, the riser section can be quickly removed from the base for easy transportation and the base can be used with a stand adapter for a low mounting position.
The 40" Grip Arm with Hex Stud is a 2.5" grip head mounted on the end of a 40" piece of steel tubing 16mm in diameter and finished with a faceted hex stud to keep lighting fixtures in position when they are placed on the end of the arm. The grip head consists of a pair of rotating aluminum discs attached to a 16mm receiver. The discs have four different sized V-shaped jaws to accept any accessory with a 5/8", 1/2", 3/8" or 1/4" mounting stud or tubing. The V-shaped jaws have teeth that grab whatever is mounted between the plates securely. The 2.5" grip head features an oversized ergonomic T-handle and dedicated roller bearings designed for maximum torque.
Learn MoreExcl. Tax: SAR0.00 Incl. Tax: SAR0.00Call For Price
-
Excl. Tax: SAR0.00 Incl. Tax: SAR0.00Call For Price
-
ARRI 60° Honeycomb Grid for SkyPanel S120
Controls Light Spill, Narrows Beam Angle Reduces Multiple Shadows Slides into SkyPanel S120 Accessory Slot Learn MoreExcl. Tax: SAR0.00 Incl. Tax: SAR0.00Call For Price
