Photography

Key Features 24.2MP APS-C Exmor CMOS Sensor BIONZ X Image Processor UHD 4K30p Video with HLG & S-Log3 Gammas XGA Tru-Finder 2.36m-Dot OLED EVF 3.0" 921.6k-Dot 180° Tilting Touchscreen 5-Axis SteadyShot INSIDE Stabilization Up to 11-fps Shooting, ISO 100-32000 4D FOCUS with 425 Phase-Detect Points Real Time Eye AF for Stills and Video Headphone & Mic Ports, Wi-Fi & Bluetooth Learn More

Key Features Minolta MD/MC/SR Lens to EF-Mount DSLR 1.4x Multi-Coated Focus Correction Lens Maintains Infinity Focus Leaf Spring Mount Design Brass with Stainless Steel Finish Learn More

Key Features Canon EF/EF-S Lens to Sony E Camera Maintains AF, AE, and IS Functions FUSION Technology Transfers Exif Data Firmware Upgradeable, Built-In Micro-USB AF Mode Toggle Switch Control Aperture from Camera Body Retains Infinity Focus Removable Foot with 1/4"-20 Tripod Mount Chrome-Plated Brass Construction Learn More

The 67mm Variable Neutral Density Filter from Tiffen offers a unique way of maintaining total control over your depth of field as well as presenting an efficient way to create some special effects. The filter is designed with a built-in rotating ring that controls neutral density ranging from 2 - 8 stops (0.6- 2.4). The heavier the density, the slower your shutter speed will be. This longer exposure allows the shutter to remain open long enough to record the same amount of light but will also create movement within the shot. Another major benefit of this filter is the elimination of having to buy and carry around individual neutral density filters. With this one filter, you can rotate to the degree of ND you want - a real time and money saver.

Simply mount the filter on your lens, set it to "Min" density then frame and focus. Care must be taken with focusing at heavier densities to make sure focus is accurate. However, if it isn't, switch to manual focus and rotate to the desired degree of filtration.

For example, if your standard exposure without the filter is 1/500 @ f/8 and you then set the filter to "Min", you change the shutter speed to 1/125 at the same aperture - thereby losing 2 stops of speed while gaining a hint of "blur" in the image. If that's not enough filtration, continue rotating the filter until you reach the shutter speed you desire. Using the above example, you can even get down to 1/2 second @ f/8 (8 stops). It should be noted that the calibration marks on the filter ring are to be used only for reference and should not be regarded as accurate settings for specific densities.

A Neutral Density filter is used to create some unusual special effects such as capturing the "blur" of the rippling water of a waterfall or the swirling effect of city traffic. Since it allows the use of slower shutter speeds in bright light, it becomes possible to create these special effects that would normally not be possible to capture without the filter. And, since it can also help to control your depth of field, it permits you to shoot at wider apertures. Ultimately, its value is in helping to prevent bright, overly washed out images shot in bright light.

The ColorCore process allows Tiffen to control the color and density of their filters, and the characteristics of special effects filters with much greater accuracy than typical dyed-in-the-mass filters, which usually exhibit color and density variations. In this way, Tiffen can better control the various densities of their filters and thereby create more exact degrees of filtration.

Thin Profile Ring (9mm) - The wider front filter ring helps reduce the possibility of vignetting (the darkening of corners) at wide angle and is not deep enough to accommodate a lens cap It allows you to have continuous control over the amount of light coming through your lens in an approximate range of 2 (ND 0.6) to 8 (ND 2.4) stops

Learn More

Angelbird 64GB UHS-II SDXC Overview

Top Memory Cards for Photo and Video Recording

Designed for high bit depths, frame rates, and resolutions, including Full HD, 4K, and 3D video, as well as raw and continuous burst photography in DSLR and drone systems, the 64GB AV Pro MK2 UHS-II SDXC Memory Card (2-Pack) from Angelbird features a storage capacity of 64GB and takes advantage of the UHS-II bus to support sustained read speeds of 260 MB/s and sustained write speeds of 140 MB/s. This card has also been designed with the V60 Video Speed Class rating, which guarantees minimum write speeds of 60 MB/s.

UHS-II media achieves its speed through an extra row of pins and while this card has been designed for cameras that are UHS-II / V60 compatible, it may be used in devices that do not support UHS-II / V60. However, bear in mind that this card will then default to your device's speed class and bus rating, such as UHS-II and V30, which supports minimum write speeds of 30 MB/s, or UHS-I and U3, which also supports minimum write speeds of 30 MB/s. If your device does not support U3, this card is compatible with the U1 and Class 10 standards, each of which guarantees minimum write speeds of 10 MB/s.

Built for extreme conditions, Angelbird's 64GB AV Pro MK2 UHS-II SDXC Memory Card (2-Pack) is protected against water, shock, x-rays, magnets, and temperatures ranging from -13 to 185°F. Also featured is ECC data reliability, wear leveling, and power management for low power usage. A built-in write protect switch helps to safeguard your content from being erased. Included is an activation code for the full limited warranty and additional free software licenses and content.

Learn More

Key Features

• 20.1MP 1" Exmor RS BSI CMOS Sensor
• ZEISS 24-70mm-Equiv. f/1.8-2.8 Lens
• UHD 4K30p Video with HLG & S-Log3 Gammas
• 3.0" Side Flip-Out Touchscreen LCD
• Real-Time Tracking & Eye AF
• Background Defocus & Face Priority AE
• BIONZ X Image Processor & Front-End LSI
• Directional 3-Capsule Mic & Mic Jack
• Multi-Interface Shoe, Built-In ND Filter
• Product Showcase Setting

Learn More

Key Features C-Mount Lens to Canon EOS M Camera Anodized-Aluminum Construction Learn More

Key Features Sony A to F Mount DSLR 1.4x Multi-Coated Focus Correction Lens Built-In Iris Control Maintains Infinity Focus Leaf Spring Mount Design Brass with Stainless Steel Finish Learn More

The 77mm Variable Neutral Density Filter from Tiffen offers a unique way of maintaining total control over your depth of field as well as presenting an efficient way to create some special effects. The filter is designed with a built-in rotating ring that controls neutral density ranging from 2 - 8 stops (0.6- 2.4). The heavier the density, the slower your shutter speed will be. This longer exposure allows the shutter to remain open long enough to record the same amount of light but will also create movement within the shot. Another major benefit of this filter is the elimination of having to buy and carry around individual neutral density filters. With this one filter, you can rotate to the degree of ND you want - a real time and money saver.

Simply mount the filter on your lens, set it to "Min" density then frame and focus. Care must be taken with focusing at heavier densities to make sure focus is accurate. However, if it isn't, switch to manual focus and rotate to the desired degree of filtration.

For example, if your standard exposure without the filter is 1/500 @ f/8 and you then set the filter to "Min", you change the shutter speed to 1/125 at the same aperture - thereby losing 2 stops of speed while gaining a hint of "blur" in the image. If that's not enough filtration, continue rotating the filter until you reach the shutter speed you desire. Using the above example, you can even get down to 1/2 second @ f/8 (8 stops). It should be noted that the calibration marks on the filter ring are to be used only for reference and should not be regarded as accurate settings for specific densities.

A Neutral Density filter is used to create some unusual special effects such as capturing the "blur" of the rippling water of a waterfall or the swirling effect of city traffic. Since it allows the use of slower shutter speeds in bright light, it becomes possible to create these special effects that would normally not be possible to capture without the filter. And, since it can also help to control your depth of field, it permits you to shoot at wider apertures. Ultimately, its value is in helping to prevent bright, overly washed out images shot in bright light.

The ColorCore process allows Tiffen to control the color and density of their filters, and the characteristics of special effects filters with much greater accuracy than typical dyed-in-the-mass filters, which usually exhibit color and density variations. In this way, Tiffen can better control the various densities of their filters and thereby create more exact degrees of filtration.

Thin Profile Ring (9mm) - The wider front filter ring helps reduce the possibility of vignetting (the darkening of corners) at wide angle and is not deep enough to accommodate a lens cap It allows you to have continuous control over the amount of light coming through your lens in an approximate range of 2 (ND 0.6) to 8 (ND 2.4) stops

Learn More