Pro Video

• Control up to 200 Compatible PTZ Cameras
• Serial Control 5 Cameras Directly
• Zoom/Focus Rocker Joystick
• Touch Panel GUI, Touch Focus & More

Learn More

Similar to its predecessor, the ATEM Mini, the ATEM Mini Pro from Blackmagic Design is a four-input live production switcher with an integrated control panel designed for multicamera live streaming up to HD video to the internet or broadcast applications from gaming consoles, corporate computer streams, or HD cameras. Along with the software control update, the Mini Pro builds on the Mini with features such as live stream data rate and status information, a built-in hardware encoder, simultaneous recording to USB drives, drive hot swapping with the Blackmagic MultiDock, added record and stream buttons, stream caching, a timecode generator, program preview multiview, tally support, and support for Blackmagic Design Pocket Cinema Camera 6K and 4K to utilize as your broadcast sources. The ATEM Mini Pro retains the same rear-panel setup on which four HDMI inputs are available on the rear of the chassis and they input up to 1080p HD video. There is also an HDMI output for a projector or multiview monitoring, a USB Type-C output as for recording HD video to a computer, and an RJ45 10/100/1000 Ethernet port for direct live streaming as well as system management, remote control, and upgrades. You can adjust frame rate depending on the quality of your stream, and there is no need for additional streaming software because the Pro includes a built-in hardware encoder. The updated ATEM Software Control Panel is used for control and configuration of the ATEM Mini Pro via USB or Ethernet, and it allows you to monitor the data rate, audio meters, configuration, and status of your live feed. The built-in color control panel has the same configuration of DaVinci Resolve, eliminating any learning curve. Advanced features include the ability for engineers to upload an XML configuration file to make it easier to change all your settings at once. The control surface features the same easy-to-view, backlit control buttons to enable selecting camera inputs, controlling transitions, keyers, settings, and the DVE. The ATEM Mini Pro adds several buttons to the right side such as a quick record button, which allows you to instantly record your live stream to the connected USB source, or by holding it down, you can hot-swap drives when using the Blackmagic MultiDock if you need to quickly get down to editing. On Air and Stream buttons have also been added to instantly start and stop your stream once it is set up in software control. The added Video Out buttons on the right side allow you to select a program preview for each source, so you can make sure each source is ready to go for air. The ATEM Mini Pro features the same upstream and downstream keyers, an advanced chroma keyer, two linear/luma keyers, a DVE transition keyer, a pattern generator, and color generators. There is also media player support for fill and key images, which supports up to 20 stills in PNG, TGA, BMP, JPEG, and TIFF formats. Learn More

Overcoming the challenges in assembling a set of lenses over time the Rokinon 14mm T3.1 Cine DS Lens for Canon EF Mount covers full-frame sensors and features a multi-layer coating process for consistent color rendition from lens to lens. It features industry standard geared focus and iris rings that share a common position with other Rokinon Cine DS lenses. This 14mm lens produces a 115.7°, ultra-wide angle-of-view when used with a full-frame sensor. Hybrid aspherical lenses render sharply defined images with a minimum of distortion and chromatic aberrations, and the minimum focus distance is 11" from the lens.

Please note that some cameras may require that Shutter Lock be disengaged when using this lens.

14mm lens with approximately 115.7° angle-of-view on full-frame cameras.

Ultra Multi Coated lenses minimize flare and ghosting, and the lenses are matched to a color standard eliminating the need to acquire an entire set of lenses at the same time.

Industry-standard gearing for focus and aperture rings. Each lens in the Rokinon DS series share common focus and iris gear ring positions, which speeds up lens changes as accessories such as follow focus units or iris motors don't have to be re-positioned. "De-clicked" aperture ring for smooth iris pulls.

A minimum focusing distance of 11" allows you to get up close to your subject.

A built-in petal-type lens hood provides flare protection without a matte box.

Learn More

The HXR-MC88 Full HD Camcorder from Sony is designed for education, government, and individuals who require a lightweight HD camera solution. The HXR-MC88 features a 14.2MP 1" Exmor RS CMOS chip with a BIONZ X image processor that can work with as little as 1.7 lux illumination in low-lux mode for sharp images. The camera records up to Full HD 1080p60 at 28 Mb/s in the widely supported AVCHD format. The Fast Hybrid autofocus system supports phase detection, face detection, and lock-on features to quickly capture sharp, in-focus images. Its fixed 29mm ZEISS Vario-Sonnar T wide-angle zoom lens features a 12x optical zoom and up to 48x digital zoom, and you can control iris, shutter, and ISO/gain via auto or manual operation. There is also a built-in neutral density filter wheel that cuts light by 2, 4, and 6 stops, allowing you to leave your individual ND filters at home. The HXR-MC88 features one Sony Multi Interface (MI) Shoe which allows the attachment of proprietary accessories, such as lights and microphones. The camera includes an XLR handle that connects to the MI shoe and provides two 3-pin XLR audio inputs with 48V phantom power. For live monitoring it has a 3.5" OLED touchscreen LCD monitor and an 0.39" viewfinder, both of which provide bright and accurate images. There is an HDMI type A as well as a multi-/micro-USB output. Video can be recorded to dual SDHC/SDXC card slots in relay or simultaneous modes; a Sony Memory Stick PRO-HG or PRO Duo (Mark 2) can be used in the first slot. A battery, AC adapter, lens hood, and lens cap are included. Learn More

Holds Prosumer Video Camera Gear

Ergonomic,Contoured Shell Design

Eight Padded, Touch-Fastening Dividers

Side Pockets for Accessories & Tripod

Padded Grab Handle on Top of Pack

Padded Shoulder Harness with Connector

Mesh Back Panel to Wick Away Moisture

Adjustable Waist Belt

Included Rain Cover with Pouch

Learn More

SmallRig 1241 Overview

The aluminum-constructed 1241 Cold Shoe from SmallRig directly mounts to any camera accessory with 1/4"-20 or M2.5 threads so it can be used to mount your camera to rigs, brackets, and cages. You can adapt a microphone, video light, or other accessory to the mount, just follow the arrows at the top that show the direction to slide the accessory in. The bending bevels inside the mount prevent the accessory from sliding out or becoming accidentally removed.

Learn More

. Learn More

Neutrik NBB75FA Overview Constructed by Neutrik to meet HD requirements, the NBB75FA is a BNC feed-through coupler offering a true 75 Ohms design. It features a gold-plated cage-type clip, thereby ensuring both optimal shielding and minimal contact resistance. It also sports a closed-contact design in order to provide durability. This adapter is suitable for HD, SDI, Video, AES/EBU, YUV, RGB, RGBH, and RGBHV connections. Learn More

PA2/4 Video Cable Marker - Orange Ident No. 3 / Pack 100 Learn More