smallrig

SmallRig CCS2645 Overview

The lightweight Camera Cage from SmallRig provides accessory mounting and protection for your a7 III and a7R III series mirrorless camera. This formfitting aluminum cage maintains access to the camera's controls and features a variety of mounting options. The cage features a dark olive finish and features rubber padding on the base to protect the camera.

In addition to one shoe mount and multiple 1/4"-20 and 3/8"-16 accessory threads, the cage features several ARRI-style accessory threads for preventing accessories from twisting when mounted on the cage. Mounting holes are on the front for a separately available lens adapter. The cage also incorporates an anti-twist design with its connections on the bottom using a 1/4"-20 screw and on the side with an M2.5 screw. A built-in screwdriver on the bottom allows you to secure the camera screws.

SmallRig 2065 Overview

Featuring a ball head at each end, the 7" long Articulating Arm from SmallRig can be used to mount a monitor or accessory onto your camera rig at almost any angle.

Compatible with a wide range of camera components such as a monitor, small lights, or sound gear, the aluminum and steel arm features 1/4"-20 screws on either end. Each screw mount features rubber padding to prevent your equipment from twisting and scratching. Both ball heads and the center joint are secured using a large locking lever, and each end features a tightening thumbscrew for easy accessory mounting.

SmallRig CCC2271 Overview

The dedicated Camera Cage from SmallRig is a protective aluminum frame that enables you to mount accessories onto your Canon 5D Mark III or 5D Mark IV. Two cold shoes, a NATO rail, and multiple 1/4"-20, 3/8"-16, and ARRI-style accessory threads are built into the cage's top and sides.

Access to the camera's controls, compartments, and connectors is maintained when the cage is fitted to the camera. The versatile cage features a 1/4"-20 camera mounting screw and rubber pads on the bottom camera mount to protect and secure your camera. A screwdriver is included to tighten the camera onto the cage, and it stores on the bottom of the cage.

SmallRig 1846B Overview

The 1846 V-Lock Assembly Kit v2 from SmallRig can be used to mount a V-mount battery on your camera or gimbal rig. Designed for use with a battery that powers your camera via a D-Tap or other port and a cable, it does not provide a power interface with your camera.

This cheese plate-style component consists of a female V-lock dock that mounts onto the included male V-lock. Multiple 1/4"-20, M3, and M4 mounting threads provide compatibility with a wide variety of camera cages and rigs.

Note:

This product is not compatible with the PAGlink PL96T Time Battery and PATONA Premium Battery for BP-190WS.

SmallRig HSS2642 Overview

The dark olive Wooden Side Handle from SmallRig provides left- or right-handed grip for your camera cage. This comfortable aluminum and wood grip attaches to your cage via an ARRI-style anti-twist 3/8"-16 mount. It features two 1/4"-20 threads, one 3/8"-16 thread, and one cold shoe mount for adding a light, microphone, monitor, mounting arm, or other accessory.

This handle also features a sliding design that enables you to adjust it vertically to your preferred position.

SmallRig BSS2250B Overview

Work with some extra comfort and stability when shooting with your DJI Ronin-S or Ronin-SC rig with the Dual Handgrip from SmallRig. Enabling you to hold your gimbal with both hands, this handgrip is designed to reduce arm fatigue, especially during long shooting sessions. The dual handgrip locks onto the Ronin-S via a ratchet knob, which allows for quick and easy adjustment along the gimbal's bar. The mounting socket is lined with rubber on the inside to prevent scratching the gimbal.

The dual handgrip can be held upside down for shooting in inverted mode, and it disassembles into five parts for easy storage and transport. With four 1/4"-20 holes on top and 1/4"-20 and 3/8"-16 holes on the bottom, it gives you the added benefit of enabling you to easily mount separately available accessories such as cold shoes and magic arms. To further expand your handheld rig, you can attach a separately available 25mm mounting rod clamp to the handgrip's 25mm handlebar.

SmallRig 1955 Overview The versatile DSLR Action NATO Handle from SmallRig quickly mounts to a standard NATO rail to provide a balanced gripping point for your camera or camcorder. The handle features both forward-to-back and side-to-side adjustment to help balance your camera rig.

Additional features include two cold shoe adapters, multiple 1/4"-20 and 3/8"-16 threads, and two ARRI-style anti-twist accessory mounts.

SmallRig 2092B Overview

The Universal 15mm LWS Support Baseplate from SmallRig provides an Arca-type, non-slip quick release plate and 15mm rod-based accessory support for your mirrorless or small cine-style camera.

This baseplate system features 1/4"-20 and 3/8"-16 tripod threads and thumb-lever locks. Four vertical rods allow for an adjustable vertical range of 2.3", enabling optimal positioning of your camera accessories. The integrated 15mm rod clamps allow you to mount the baseplate on a standard 15mm LWS rod system, or you can use the mounting threads to attach a quick release plate to the bottom.

SmallRig BSS2403 Overview This Offset Plate Kit from SmallRig allows you to mount your Blackmagic Design Pocket Cinema Camera 6K or 4K on a handheld gimbal, allowing more room between the camera and gimbal arm. This adjustable plate fits onto the original gimbal plate using a quick release clamp, and the plate features a 1/4"-20 camera mounting screw.

The plate allows the camera to slide back and forth to add clearance as well as help with balance. Safety features include anti-twist pins so the camera doesn't rotate and rubber pads to prevent scratching. The kit also includes a removable connector that is used to attach SmallRig's Metabones support when using heavy lenses. Screws and an Allen wrench are also included.