Lighting

For SkyPanel S360 LED Softlight Five Diffused Surfaces Soften Output Size: 52 x 37 x 16" Magic Cloth & Black Sides Control Spill Elastic Corners for Mounting Folds Down for Storage Carrying Bag Included Accepts Optional Fabric Grid Learn More

Omnidirectional Diffusion Dome 39" Diameter, Soft Quality of Light Includes 2 Removable Skirts Fast Attachment via QLM System Learn More

The Silver/Blue, Pole Operated L7-C LE2 Color LED Fresnel with powerCON Cable is part of ARRI's continuing effort to replace traditional Fresnels with powerful LED versions that offer unprecedented color control. The L7-C LE2 shares many characteristics with its predecessor, but the most obvious improvement is a 25% boost in power, increasing the light's tungsten equivalency from 750W to 1000W. This pole-operated version is meant for overhead mounting on pipe lengths or a grid. Pan, tilt, and focus are controlled from below with an optional pole using the 3 corresponding cups on the unit's special yoke. The key characteristic of any Fresnel is flood-to-spot capability, and the L7-C LE2 meets and exceeds expectations with an impressive beam angle of 15-50°. There's no learning curve when swapping out L7-C LE2 fixtures for fixtures with standard Fresnels. In fact, you're not going to be moving them around or juggling scrims in high places thanks to the 100 - 0% on-board dimming. The L7-C LE2 is a "fully tune-able" white light source too, allowing you to match existing fixtures from a warm 2800K to ice-blue 10,000K. The on-board controller allows manual intensity control as well as color temperature and +/- green. Specific color shades and skin tones can be matched through the full gamut color mixing feature. All functions can be controlled via DMX, an ideal feature for broadcast studios. The hybrid cooling system allows for cooling both actively (with a fan) or passively (without a fan) for times when the set needs to be dead quiet. The L7-C LE2's 1000W equivalent output draws only 160W during normal operation, making possible a savings of a 75% over similar output tungsten lights. And low heat means lower AC bills in the studio. You can actually run 9x L7-C LE2's from a 20A, 120VAC outlet as opposed to two 1000W or three 650W standard fixtures. Learn More

Kupo KG080812 Overview

The Shoulder Strap for Click Stands from Kupo has two clasps that attach to the joined stands' locking loops so they can be carried over the shoulder.

Learn More

• Fits Most Canare BNC, F, RCA Crimp Plugs
• Adjustable for 4 to 11mm Cable OD
• Presets for V-3C, LV-61S/L-4CFB, V-5C
• Presets for V-5CFB, LV77S/L-5CFB

Learn More

Remote Control of All SkyPanel Functions Mimics Fixture's Built-In Control Panel Ergonomic Design Aluminum Chassis with Rubber Corners Rear Mounted Magnet for Mounting USB Cable and Carry Case Included Learn More

Replaces Rubber Feet Durable Aluminum Construction Learn More

This is the Arri 8-Leaf Barndoor for the T1 Studio Fresnel. The barndoor set is constructed of a high strength-to-weight ratio metal which provides durability and resistance to bending. The four additional leaves swing forward, ensuring greater control of spill and tunneling of the light beam. Each leaf is user-tightenable. Learn More

Kupo KG701611 Overview

The black Convi Clamp with Adjustable Handle and Hex Stud from Kupo has a load capacity of 44 lb and a ratcheted handle that allows

you to reposition it for tightening and loosening in tight places. Made from lightweight aluminum alloy with stainless steel bolts, the clamp

has jaws that open from 0.2 to 2" to grasp poles, pipe or other objects. A saddle (wedge) is included to create a flat surface for items like a

desk, shelf or wood plank. The Convi Clamp has a hexagonal receiver that accepts many Convi accessories such as the included anti-

twist brass hex stud that allows mounting of lights, cameras or accessories.

Learn More