Lighting
-
Excl. Tax: SAR0.00 Incl. Tax: SAR0.00
Call For Price
-
Excl. Tax: SAR0.00 Incl. Tax: SAR0.00
Call For Price
-
Neutrik Coax Cable Stripper for rearTWIST BNC Connectors
Neutrik Coax Cable Stripper for rearTWIST BNC Connectors Learn MoreExcl. Tax: SAR0.00 Incl. Tax: SAR0.00Call For Price
-
Kupo Baby 5/8" Receiver for 3 & 4-Way Clamp
Kupo KG005912 Overview
The Baby 5/8" Receiver is designed to be attached to any of the mounting locations on Kupo's 3-Way Clamp (KG900412) or 4-Way Clamp (KG900712) to accept any light fixture or accessory with a baby 5/8-inch receiver. The proprietary notch that slides into one of the mounting locations and is secured by turning the locking collar.
Attaches to any of the mounting locations on the 3-Way or 4-Way Clamp
Accepts any light fixture or accessory with a baby 5/8" (16 mm) receiver
Proprietary notch slides into one of the mounting locations and is secured by turning the locking collar
Learn MoreExcl. Tax: SAR0.00 Incl. Tax: SAR0.00Call For Price
-
Litepanels Astra 3X Bi-Color LED Panel
- Beam Spread: 46°, TIR Optics
Variable Color Temperature: 3200-5600K
Passive Cooling
High CRI: Daylight 95, Tungsten
0-100% Continuous Dimming, Flicker Free
Three Optional DMX512 Control Modules
Optional Bluetooth Module with Free App
Optional Gold Mount and V-Mount Plates
Multi-Voltage AC, Optional Battery Power
Excl. Tax: SAR0.00 Incl. Tax: SAR0.00Call For Price
-
ARRI DoPchoice SNAPBAG Softbox for SkyPanel S60
Attaches Directly to the SkyPanel Includes 1/2 Grid Cloth Diffusion No Mounting Hardware Needed Learn MoreExcl. Tax: SAR0.00 Incl. Tax: SAR0.00Call For Price
-
ARRI CONTROL PANEL CABLE 5M
ARRI L2.0033799 (L20033799) Cable for ARRI Orbiter Control Panel - 5m (16.4 ft). The control panel cable is not included in the control panel. It must be pruchased separately. Learn MoreExcl. Tax: SAR0.00 Incl. Tax: SAR0.00Call For Price
-
ARRI DoPchoice Medium Snapbag for Orbiter
For Arri Orbiter No Speed Ring Required Controlled Soft Light Accepts Accessory Snapgrids Durable Construction for Fast Setup Attaches to Quick Lighting Mount (QLM) Contains Digital Optics Identification Learn MoreExcl. Tax: SAR0.00 Incl. Tax: SAR0.00Call For Price
-
ARRI SkyPanel S30-C LED Softlight (Blue/Silver, Bare Ends)
ARRI continues to broaden their LED line and reaffirm their commitment to accurate color rendering with the introduction of the blue/silver SkyPanel S30-C LED Softlight. Supported by a pole operated aluminum yoke, the panel's surface area measures 14 x 11.8", making it an ideal portable, on-the-go light source for mobile applications. Output is controlled via interchangeable thermoplastic diffusers that range from Standard to Lite to Heavy to soften the light and wrap its output around your subject and the SkyPanel S30-C outputs the equivalent of a 1000W tungsten soft light while drawing a maximum of only 240W. Using technology originally designed for the L7-C Fresnel, the SkyPanel S30-C is fully color "tuneable" allowing output of a warm 2800K to icy blue 10,000K light and also uses the full RGB+W color gamut with hue and saturation control for fine adjustments. Full minusgreen to full plusgreen is also possible, so if you're lighting for blue or greenscreen, you can simply dial your color chosen in. This wide degree of control is responsible for a very high CRI of 95 and a rating of 91 with the newer TLCI standard. All of these functions as well as 0-100% dimming can adjusted locally with the SkyPanel's onboard controller or remotely via DMX or over a LAN. Besides inputs and outputs appropriate to these functions, the light also has a USB-A port for downloading firmware upgrades from a thumb drive, Windows or Mac. The SkyPanel S30-C can be used worldwide, thanks to its included 90-250 VAC power supply, but it can also use optional 23-36 VDC batteries when mains power is unavailable. Besides the power supply, the light comes with a combo baby/junior (5/8" | 1-1/8") pin and a standard diffuser. This version of the light comes with a 3.3'-long bare ends DC power cable. Learn MoreExcl. Tax: SAR0.00 Incl. Tax: SAR0.00Call For Price
-
Kupo Backlite Base Stand
The Kupo Backlite Base Stand is ideal for lighting backgrounds from a very low angle behind the subject. The stand has a 5/8" receiver and includes a double-sided 5/8" stud. Learn MoreExcl. Tax: SAR0.00 Incl. Tax: SAR0.00Call For Price