Pro audio

Neutrik NA2FP Overview Neutrik's 3-Pole XLR Female to Mono 1/4" Male Adapter (Tip, Sleeve Contact) is designed to bridge the gap between XLR and 1/4" connection points. This adapter has been pre-wired, and it features a die-cast shell for durability. Learn More

Neutrik NC4MX-B Overview The NC4MX-B from Neutrik is a 4-pin XLR male cable connector that's regarded as an "industry standard" for quality and ease of use. The connector has only 4 parts and no screws for easy assembly. It has a rugged black zinc die cast shell and a fiberglass reinforced hard plastic insert for lasting durability. A chuck type strain relief system provides secure cable clamping, while a boot with a rubber gland gives excellent protection against bend stress. The connector has gold contacts and UL-recognized components. Colored rings and boots are available separately for easy coding and marking. Only 4 parts and no screws for easy assembly Rugged black zinc die cast shell and a fiberglass reinforced hard plastic insert for lasting durability A chuck type strain relief system provides secure cable clamping, while a boot with a rubber gland gives excellent protection against bend stress Gold contacts and UL-recognized components Colored rings and boots are available separately for easy coding and marking Learn More

• Fast-Setup System for DIY Videographer
• MMD 835 Dynamic Cardioid Mic Capsule
• Lightweight Handheld Transmitter
• Ultra-Compact Plug-In Receiver
• Protected Peer-to-Peer Connection
• Easy to Use, Automatic Operation
• Automatic Mic-Level Control
• 4-Hr Rechargeable Batteries + USB Power
• Up to 8 Mics on Set / 98' Range

Learn More

The Sennheiser MKE 40 is a condenser lavalier microphone compatible with SK 100, SK 300, and SK 500 Evolution Wireless Series bodypack transmitters. Featuring a cardioid polar pattern that helps keep unwanted sound from coming through the mic, and high gain-before-feedback, it is well suited to capture speech on stage, or in any live sound applications. The MKE 40 delivers a 40 Hz to 20 kHz frequency response and handles sound pressure levels up to 118 dB. It can be used for close-miking both voices and instruments to capture a direct sound with accurate bass reproduction. The microphone ships with two windshields (black & gray), a clip (black), and the MZM 2 / MZM 10 magnetic mount set. Learn More

. Learn More

The Sennheiser MZW-1 Foam Windscreen minimizes light wind and popping noise for the Evolution wireless and wired handheld microphones, and is designed to fit the SKM100, 300 and 500 handheld transmitters. Learn More

Neutrik NC3MRX-B Overview The Neutrik NC3MRX-B 3 Pole Right Angle XLR Male Cable Connector is the right angle version of the XX connector series cable. This cable connector offers features which make it more reliable, easier to assemble, and improves contact integrity as well cable strain relief. Slim right-angled connector 7 selectable cable outlet positions Male connector with improved locking recess without "window," more stringent housing increases durability Improved chuck type strain relief provides higher pull-out force and makes assembly easier and faster Boot with polyurethane gland offers high protection against cable bending stresses Colored rings and boots available for coding or identification Sleek and ergonomic design makes it valuable and handy Learn More

Neutrik NA2MPMM Overview Neutrik's 3-Pole XLR Male to RCA Male Adapter is a pre-wired connection point allowing you to conjoin heretofore incompatible items. In this case, you're given a rugged, die-cast shell which facilitates XLR male to RCA male connections. Learn More

Genelec 8040B Overview
Styled in a producer finish, the Genelec 8040B is a single 2-way active studio monitor designed to provide accurate mix referencing for audio engineers, musicians, and producers in project studios, small to medium-sized control rooms, broadcast trucks, or mobile setups. It features a 90W amp driving a 6.5” woofer and a 90W amp pushing a 3/4” metal-dome tweeter, producing a frequency response of 45 Hz to 21 kHz.

A proprietary waveguide enhances imaging, while the bass reflex port extends the low-frequency response. The aluminum enclosure is shaped to minimize diffraction. It supports a balanced input via an XLR 3-pin connector. Room compensation options include high- and low-frequency adjustments. There is a selectable power-saving mode that enables automatic power up/down via a signal-sensing circuit.

The 8040B offers multiple mounting options including threaded holes for compatibility with OmniMount and K&M brackets, and an Iso-Pod isolation stand.

6.5" woofer and 3/4" metal-dome tweeter
90W LF amplifier, 90W HF amplifier
45 Hz to 21 kHz frequency response (-3 dB), 48 Hz to 20 kHz frequency response (± 2 dB)
Proprietary waveguide utilizes DCW (Directivity Control Waveguide) technology for improved imaging and a wider listening area
Bass reflex port provides extended low-frequency response
Room compensation controls include high- and low-frequency adjustments
Low-diffraction aluminum enclosure utilizes MDE (Minimum Diffraction Enclosure) technology
Balanced XLR 3-pin input and input level control
ISS (Intelligent Signal Sensing) automatic power-saving mode
Multiple mounting options: Iso-Pod and threaded holes that are compatible with OmniMount and K&M brackets
Includes Iso-Pod isolation stand for vibration decoupling

Learn More