Pro audio
-
Neutrik NA3FDM XLR Female to Male Feedthrough Adapter for Panel Mount
Neutrik NA3FDM Overview The NA3FDM XLR Female to Male Feedthrough Adapter for Panel Mount from Neutrik is designed specifically for the kinds of wall panels often utilized in studios and on stage. It features a zinc diecast chassis and a steel-element latch-locking device. This adapter offers a 3-pin XLR female on the panel side and a 3-pin XLR male on the back side. Learn MoreExcl. Tax: SAR0.00 Incl. Tax: SAR0.00Call For Price
-
Genelec 8050B Active Two-Way 8" Studio Monitor (Single)
Genelec 8050B Overview
Learn More
The 8050B Active Two-Way 8" Studio Monitor from Genelec provides an accurate reproduction of the source material in a compact form-factor with high output. Its die-cast aluminum enclosure features a rounded shape, which minimizes distortions caused by edge diffraction. The metal dome tweeter is surrounded by a smoothly-shaped Directivity Controlled Waveguide, which helps to create an even response when listening both on and off axis.
The 8050B is built with Intelligent Signal Sensing (ISS) technology which automatically activates the speaker when an audio signal is detected, and puts it in Standby Mode when no signal is present, reducing the energy consumption to less than 0.5 watts. The 8050B features a 120 watt high frequency amplifier for its 1" tweeter, and a 150 watt low frequency amplifier for its 8" woofer. The bass response is expanded by a rear-facing reflex port, and a separately available Genelec subwoofer can be used to monitor a wider array of frequencies.
An included Iso-Pod table stand insulates the speaker from vibration and enables you to tilt its position upward or downward
The Iso-Pod can be attached to the base or side of the monitor, for vertical or horizontal positioning
Well-suited for near-field studio monitoring, control rooms, editing suites, surround sound applications and multimedia entertainment systems
Rear-facing Tone Controls enable you to optimize the speaker to its environment
Threaded holes for Omnimount Series 60 brackets and K&M loudspeaker mounts
More compatible mounting accessories, such as ceiling mounts and wall brackets, are available separately
Active crossover filters
Driver unit protection circuitry
Fully magnetically shieldedExcl. Tax: SAR0.00 Incl. Tax: SAR0.00Call For Price
-
GREEN IDENT NO. 5 - PACK OF 200
PA1/3 Audio Cable Marker - Green Ident No. 5PKG200 Learn MoreExcl. Tax: SAR0.00 Incl. Tax: SAR0.00Call For Price
-
Sennheiser MK 4 Large-Diaphragm Studio Condenser Microphone
The MK 4 Large-Diaphragm Studio Condenser Microphone from Sennheiser is a condenser microphone with fine resolution and sound quality. It can be used for home studio engineers, production studios, and sound reinforcement applications. The MK 4 features a 1" large-diaphragm transducer for a full sound, a wide-frequency response, and low noise. The mic element is shockmounted to eliminate structure-borne noise and vibration. Its sensitivity and frequency response make it well suited for general vocal recording, instruments, amplifier cabinets, and more.
Large-diaphragm capsule (1")
True-condenser design
24K gold-plated diaphragm
Full-metal housing
Capsule shockmounted internally to minimize structure-borne noise
Designed for project studios and stage use
Low inherent self-noise and high maximum SPL
Made in Germany
Learn MoreExcl. Tax: SAR0.00 Incl. Tax: SAR0.00Call For Price
-
NC3MXX-HD-D male
Heavy duty male 3 pole XLR cable connector for outdoor use. Learn MoreExcl. Tax: SAR0.00 Incl. Tax: SAR0.00Call For Price
-
Sennheiser XSW-D Transmitter Beltpack Clip
Sennheiser XSW-D Transmitter Beltpack Clip Learn MoreExcl. Tax: SAR0.00 Incl. Tax: SAR0.00Call For Price
-
Neutrik NP2X-B Professional 1/4" Phone Plug
Neutrik NP2X-B Overview The Neutrik NP2X-B Professional 1/4" Phone Plug sports a thin A-gauge 1/4" plug with a chuck-type strain relief. Its slimline shell features a width of 0.57” (14.5mm), and its one-piece tip contact— constructed without rivets—helps avoid common connection problems, such as hooking up in a socket or breaking off the tip. This plug is suitable for guitar-connection applications, other audio cables, snakes, speakers, amplifiers, and mixing desks. Learn MoreExcl. Tax: SAR0.00 Incl. Tax: SAR0.00Call For Price
-
Neutrik AES/EBU Digital Impedance Transformer Adapter (75 Ohm to 110 Ohm)
Neutrik NADITBNC-MX Overview The Neutrik AES/EBU Digital Impedance Transformer Adapter allows long cable runs for digital audio signals via low-attenuation coaxial lines. It passively matches the characteristic impedance of a 75 Ohm unbalanced coaxial line to that of a balanced 110 Ohm twisted-pair cable. The adapter is equipped with a female BNC chassis input connector and a 3-pole XLR male output connector. Learn MoreExcl. Tax: SAR0.00 Incl. Tax: SAR0.00Call For Price
-
K&M 25995 Floor & Tabletop Microphone Stand with Short Boom (Black)
11.2 to 15.75" Height-Adjustment Range
Learn More
Boom Arm Measuring 12.2"
Steel Construction
Flat, Space-Saving Base
Elastic Rubber Base for Decoupling
Wingnut Boom Adjustment Design
Clutch Mechanism for Height AdjustmentExcl. Tax: SAR0.00 Incl. Tax: SAR0.00Call For Price
-
Sony UWP-D26 Camera-Mount Wireless Combo Microphone System (UC14: 470 to 542 MHz)
The Sony UWP-D26 is a dependable camera-mount wireless combo microphone system that delivers uncompromising audio quality, while still being easy to use and fast to set up with no menu diving. It is made with simplicity in mind for DIY cameramen, videographers, vloggers, and journalists working in the field without a crew. The system is packed with professional features including NFC Sync and Auto-Gain functions, which handle time-consuming frequency setup and mic-level adjustments for you, so you're ready to shoot within seconds. Rugged and lightweight, the UWP-D26 includes a bodypack transmitter with an ECM-V1BMP omnidirectional lavalier mic. Also included is a plug-on transmitter, which can be attached to a handheld microphone of your choice for man-on-the-street interviews, or to a shotgun mic for wireless booming (both types of mics are available separately). The plug-on provides 48V phantom power, giving you the option to use a condenser microphone. The low-profile camera-mount receiver is designed for enhanced mobility with compact camcorders and smaller DSLR/mirrorless cameras. It offers digital signal processing for pristine audio and analog UHF transmission with true-diversity reception for reliability-even under difficult shooting conditions. Sony shooters can take advantage of the SMAD-P5 digital MI Shoe adapter (available separately), which provides a direct, clean digital audio connection to select cameras equipped with a digital Multi Interface Shoe. With the UWP-D26 you can focus on the other critical elements competing for your attention during a shoot, and confidently record crisp, clear speech or dialog for projects ranging from documentaries to wedding videos, YouTube content, corporate spots, and hands-free interviews. The UWP-D26 is backward-compatible with Sony WL-800 and UWP Series systems. Note: While this system includes two transmitters, only one can be used at a time. Learn MoreExcl. Tax: SAR0.00 Incl. Tax: SAR0.00Call For Price